The floor cleaning agents available on the market are based on a combination of several raw materials that achieve the desired cleaning effects. It is necessary to cover the broadest possible spectrum of activity. The professional hard floor cleaning services in Oklahoma City chemistry must successfully process a wide variety of soiling and materials.
However , parameters that vary from region to region, such as different water qualities, must also be taken into account during product development. The complexing agents contained in the cleaners bind, for example, the hardness of the water used in order to prevent limescale deposits on the cleaned surfaces.
Modern cleaning agents reduce the workload
Surfactants ensure rapid wetting so that the cleaning liquor can be directly absorbed by the large total surface area of the fibers. In addition, the hydrophobic water-repellent stains are emulsified or dispersed by the surfactants and removed from the surfaces.
Mostly, surfactant combinations and other auxiliaries are used to achieve the desired synergetic effects. These capabilities of modern cleaning agents reduce the workload and make the necessary performance values for modern cleaning methods possible in the first place.
Pleasant scents after cleaning are achieved by adding modern perfumes to the formulation. Wipe care products contain care substances e.g. water-soluble polymers that remain on the surface as a protective film after each cleaning and also ensure a better appearance.
For example 1: How to clean rubber floors properly
Rubber floors, also known as elastomer or rubber flooring, are often found in hospitals and other public institutions. These coverings are produced by vulcanizing the base material rubber with sulfur and adding fillers and dyes.
As a rule, the coverings are laid out with a finish layer made of polyacrylic or polyurethane or mixtures. In annual basis , they should thoroughly cleaned and sealed with a self-polymer dispersion are.
Basic cleaning and sealing of the hard floor
Such a thorough cleaning and sealing makes it necessary that the corresponding area is not allowed to be entered for one to two days . Sealing is therefore not possible in the case of continuous room occupancy for example in hospitals. Dirt pulls into the porous soil and settles.To counteract this contamination, cleaners with a strong dispersing effect are used. They quickly loosen the dirt from the pores and are absorbed by cleaning textiles with good suction power.